33
EN
SMS
3. Enter the number and press mOK to confirm.
A confirmation beep is emitted.
To set incoming number
1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to SMS Center 1, SMS Center 2 or SMS Center 3 and press mSELECT.
2. Scroll
: to Incoming Nr. and press mSELECT.
3. Enter the number and press
mOK to confirm.
A confirmation beep is emitted.
Default SMS center
The default SMS center number is 1.
To set default SMS center
1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to Default Ctr. and press mSELECT.
2. Scroll
: to SMS center that you wish to set as default center (SMS Center 1, SMS Center 2 or SMS
Center 3) and press
mSELECT.
A confirmation beep is emitted.
1st ring
When this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in coun-
tries where calling line identity is sent after the first ring, so no phones in the house would ring when a message
arrives.
To set 1st ring
1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press mSELECT,
scroll
: to Set 1st Ring and press mSELECT.
2. Scroll
: to On or Off and press mSELECT to confirm.
The maximum length of an outgoing number is 24 digits.
The maximum length of an incoming number is 24 digits.
CD535_IFU_EN.book Page 33 Monday, September 25, 2006 1:15 PM
To Next Page
Loading...
