Philips CDC 936 - Selecting for Another Track During Play; Selecting Another CD During Play; Searching for a Passage During Play; Starting with a Particular CD

PLAYBACK ®
1 1 1
STOP/CP PUY/REPUY PAUSE SHUFaE REPEAT
PEAK
SCAN SEARCH FADER
1 1 1
SELECTING ANOTHER TRACK DURING PLAY (1-0)
• Key in the desired track number {on the current CD);
numbers consisting of two figures must be keyed in within
two seconds.
- The music stops and a moment later the selected track
begins to play.
WRONG TRACK lights up if you select a nonexistent number.
You can also select the number by using or \« 16
(press less than 0.5 seconds).
SELECTING ANOTHER CD DURING PLAY (DISC SELECT)
• Key in the desired CD number.
- The music stops and a moment later the selected CD begins
to play.
WRONG DISC lights up if you select a nonexistent number.
You can also select the number by using the DISC button 6 on
the remote control.
SEARCHING FOR A PASSAGE DURING PLAY ►► !)
• Hold 76 down to search backwards to the beginning.
• Hold 76 down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
“ the first two seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release play will
resume a few seconds before the end of the CD.
STARTING WITH A PARTICULAR CD (DISC SELECT)
• Key in the required CD number.
- If the CD compartment was open, it will now close.
- Play starts from the selected CD.
WRONG DISC lights up if you select a nonexistent number.
You can also select the number by using the DISC button 6 on
the remote control.
STARTING WITH A PARTICULAR TRACK (1-0) _
• First select the number of the required CD using DISC
SELECT 76 or DISC 6 (on the remote control).
• Then key in the required track number within 1.5 seconds.
- If the CD compartment was open, it will now close.
- Play starts from the selected track.
You can also select the (track) number by using or 76
(press less than 0.5 seconds) and then pressing PLAY/REPLAY
18.
WRONG TRACK lights up if you select a nonexistent (track)
number.
PLAYING IN RANDOM ORDER (SHUFFLE)
All CDs:
• Press SHUFFLE 20 before or during play.
- If the CD compartment was open, it will now close.
- SHUFFLE lights up and all the tracks are now played in a
random order.
- If you press 76, you will select any one of the following
tracks.
• Press SHUFFLE again if you wish to return to normal play.
NOTE!
If, during play, you open the CD compartment to change CDs
(see ’NORMAL PLAYBACK') then playback in random order
will be cancelled. Playback will stop as soon as the last track of
the current CD has been played (in normal order).
One CD:
• The CD-changer should be in STOP mode.
• Select the number of the required CD using DISC SELECT
76 or DISC 6 (on the remote control).
• Press SHUFFLE 20, within 1.5 seconds.
- DISC and SHUFFLE light up; the tracks of the selected CD
will now be played in a random order.
- If you press 76, you will select any one of the following
tracks.
- When all tracks of the selected CD have been played,
playback stops.
If you press REPEAT 27, the tracks will be repeated in a
different order each time, although the first track will always
be the same.
• Press SHUFFLE again if you wish to return to normal play.
11
English