Philips CDC 936 - Personal Presets; Opening the PRESETS Memory; Fade-In and Fade-Out Time; Extra Pause

PERSONAL PRESETS ®
In the PRESETS mode you can store your preferred settings for a number of functions in the player's memory.
All settings will remain stored in the memory, even if you switch it off.
PRESETS flCTIf-'E lights up if you press a 'wrong' key while storing settings.
OPENING THE PRESETS MEMORY (PRES) ___
• Press PRES{ets) 8.
- PRESETS FADER-SPREE-SCAN-PLAT appears on the display.
• You can now set the following functions in any required order:
FADE-IN AND FADE-OUT TIME (FADER) _
• Press FADER 24.
- FfiOE lights up with next to it the set fade-in/fade-out time.
Default time is five seconds.
• Seiect the required fade-in/fade-out time using or
16; minimum 2two seconds and maximum 10 seconds.
- The fade-in/fade-out time has now been set.
• Select the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
EXTRA PAUSE (AUTO SPACE) _
• Press AUTO SPACE 9.
- SPACE iights up with next to it the set pause time.
Defauit time is four seconds.
• Seiect the required pause time using or \« 16;
minimum 0 seconds and maximum nine seconds.
- The pause time has now been set.
• Seiect the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
PLAY MODE (PLAY/REPLAY) _
Depending on what play mode you select, after switching on
the changer, play will automatically begin with:
- all CDs (PLAY);
- the tracks of theXDs in a random order (bHUFFLE);
- the FTS programmes of the CDs (FTSP);
- the FTS programmes in a random order (FTbb);
If you select STOP, then you must start play yourself with
PLAY/REPLAY 18, SHUFFLE 20 or SCAN 22.
• Press PLAY/REPLAY 18.
- The display shows the last selected play mode.
Default setting is PLAY.
• Select the required play mode using or 16;
PLAY, SHUFFLE, FTS P(lay), FTS S(huffle) or STOP.
“ The play mode has now been set.
• Select the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
SCAN TIME (SCAN) _
• Press SCAN 22.
- SCAN lights up with next to it the set pause time.
Default time is 10 seconds. '
• Select the required scan time using or \« 16;
minimum 10 seconds and maximum 19 seconds.
- The scan time has now been set.
• Select the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
17
English