English
23
Your CD recorder is able to play the two decks sequentially
(CHANGER mode). This is the default setting.
1 Select Changer mode using the DJ MODE key.
➜ CHANGER MODE appears on the display and
iCHANGERh lights up.
2 On the deck you want to play, press PLAY/PAUSE 2;to
start CD play.
➜ 2 lights up, the track number and track time of the track
in play appear on the display.
➜ After playing the first disc the second disc will
automatically be played.
•Press DISPLAY once, twice or three times to see:
➜ remaining track time, total remaining time, permanent
text information (see Menu mode).
•To interrupt play temporarily, press PLAY/PAUSE 2;again.
➜ ; lights on the display.
•To continue play, press PLAY/PAUSE 2;again.
3 To stop play, press STOP 9.
➜ The number of tracks and the total playing time appear
on the display.
•If you want to see the information about the other deck,
press the CDR key or the CD key in the display frame.
With this double deck it is possible to play the CD recorder
deck and/or the CD player deck individually (at the same
time). In this case the extra CD output must also be connected
to an amplifier.
1 Select DJ mode using the DJ MODE key.
➜ DJ MODE appears on the display and j k lights
up.
2 On the deck you want to play, press PLAY/PAUSE 2;to
start CD play.
➜ 2 lights up and the track number and track time of the
track in play appear on the display.
•You can also play the two decks at the same time. By
pressing the CDR key or the CD key you can choose the
deck you want to listen to.
•Press DISPLAY once, twice or three times to see:
➜ remaining track time, total remaining time, permanent
text information (see Menu mode).
•To interrupt play temporarily, press PLAY/PAUSE 2;again.
➜ ; lights on the display.
•To continue play, press PLAY/PAUSE 2;again.
3 To stop play, press STOP 9.
➜ The number of tracks and the total playing time appear
on the display. If you want to see this information about
the other deck, press CDR or CD.
1 In stop mode press SCAN on the remote control.
2 The first 10 seconds of each track on the CD (or program if
set) are played.
3 Press SCAN again to return to normal CD play mode.
Intro Scan
Playing CDs on Deck 1 and/or Deck 2 (DJ mode)Play a 2-disc changer (Changer mode)
PLAYING
English
22
For unfinalized CDRW discs only.
You can erase:
- Tracks can only be erased from the end.
- With the EASY JOG you can erase more tracks.
Note: It is not possible to erase tracks within the
sequence.
- It is also possible to erase the entire disc at once.
To erase one or more tracks from the end:
1 Press ERASE once.
➜ The display shows the number of tracks and their total
playing time. ERASE TRACK and PRESS RECORD
lights up.
•If the disc is finalized,
CD
appears on the display after
inserting a CDRW in the recorder. The recorder will ask you
to confirm unfinalizing first. Confirm by pressing the EASY
JOG/ENTER key or ENTER on the remote control.
2 Select the track(s) you wish to erase by turning the EASY
JOG/ENTER key to the left.
➜ The selected track numbers start blinking on the track
bar.
➜ The display shows the remaining time after erasing the
selected track(s), the shown track will also be included
in the erasure of tracks.
3 Press RECORD.
➜ The display shows the total countdown time and
ERASE.
➜ After the selected track(s) have erased, the display
shows the remaining tracks and their total playing time.
To erase the entire disc:
1 In stop mode press ERASE twice.
➜ ERASE DISC and PRESS RECORD light up.
• If the disc is finalized,
CD
appears on the display after
inserting a CDRW in the recorder. The recorder will ask you
to confirm unfinalizing first. Confirm by pressing the EASY
JOG/ENTER key or ENTER on the remote control.
2 Press RECORD.
➜ The display shows the total countdown time and
ERASE The complete disc will be erased.
Erasure of a complete disc may take up to 15 seconds.
To Next Page
Loading...
