9EN
5 Attach the trim plate.
6 Reconnect the negative terminal of
the car battery.
Attach the front panel
1
Insert the notch on the front panel
to the chassis on the main unit.
2 Press the left end of the front panel
inwards until it is securely locked
with a "click".
Detach the front panel
Note
•
Before you insert an SD/SDHC card or reset
the system, detach the front panel.
• Before you detach the front panel, make
sure that the system is turned o.
1 Press to release the front panel.
2 Pull the front panel outwards to
remove it.
To Next Page
Loading...
