12 EN
3 Rotate to select a setting.
• [LOC ON]: Search for radio
stations with strong signals only.
• [LOC OFF]: Search for radio
stations with strong and weak
signals.
Search for a radio
station
Search for a radio station
automatically
Press or to search for the previous
or next radio station with strong signals.
Search for a radio station
manually
1 Press and hold or until [M]
blinks.
2 Press or repeatedly until the
target frequency is displayed.
Store radio stations in
memory
Note
•
You can store a maximum of six stations in
each band.
Store radio stations
automatically
1 Press / /BAND repeatedly to
select a band.
2 Press and hold AS/SOURCE until
[STORE---] is displayed.
» After the search is complete,
the rst stored radio station is
broadcast automatically.
• To select a stored radio station,
press
, , , , , or .
Store radio stations manually
1 Press / /BAND repeatedly to
select a band.
2 Tune to the radio station that you
want to store.
3 Press and hold , , , ,
, or to store the radio station at
the selected channel.
• To select a stored radio station,
press
, , , , , or .
Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune
to an RDS station, the station name is
displayed.
Enable the RDS function
Note
•
The RDS function is enabled by default.
• Only when the RDS function is enabled,
RDS related settings can be accessed..
1 Press MENU to access the system
menu.
2 Press / repeatedly until [RDS
ON] or [RDS OFF] is displayed.
3 Rotate to select [RDS ON].
» The RDS function is enabled.
• To disable the RDS function,
rotate
to select [RDS OFF].
To Next Page
Loading...
