Philips CE233 - Page 15

14 EN
Receive trac announcement
If you want to receive trac
announcement, enable the TA (Trac
Announcement) function.
1 Press MENU to access the system
menu.
2 Press / repeatedly until [TA ON]
or [TA OFF] is displayed.
3 Rotate to select a setting.
• [TA ON]: When a trac
announcement is on air, the
system automatically switches
to the tuner mode and
begins to broadcast the trac
announcement. When the trac
announcement is over, the
system returns to the previous
mode.
• [TA OFF]: Trac announcement
does not cut in.
Tip
•
When a trac announcement cuts in, you
can press to switch the system to the
previous mode.
Synchronize the system clock
You can synchronize the system clock
with an RDS station that transmits time
signals.
1 Press MENU to access the system
menu.
2 Press / repeatedly until [CT ON]
or [CT OFF] is displayed.
3 Rotate to select a setting.
• [CT ON]: Synchronize the system
clock with the RDS station
automatically.
• [CT OFF]: The automatic clock
synchronization with RDS
station is disabled.
Tip
•
The accuracy of time depends on the RDS
station that transmits time signals.