26 EN
• [LT/RT] - Select this if the system
is connected to a Dolby Pro Logic
decoder.
• [STEREO] (Stereo) - Select this when
sound output is transferred to the two
front speakers only.
• [VSS] (Virtual surround sound) -
Enable virtual surround sound effects.
• [OP MODE] (OP mode)
• [LINE OUT] - Line out mode, with
digital dialog normalization.
• [RF REMOD] - RF remodulation
mode, with heavy compression and
digital dialog normalization.
• [DYNAMIC RANGE] (Dynamic range
control)
Set a dynamic range for audio output:
[FULL] (Full), [6/8], [4/8], [2/8], or [OFF]
(Off).
• [DUAL MONO] (Dual mono)
Select an output mode of audio signals.
• [STEREO] (Stereo) - Transfer original
stereo sound signals to speakers.
• [MONO L] (Left monophonic) -
Transfer left monophonic sound signals
to speakers.
• [MONO R] (Right monophonic) -
Transfer right monophonic sound
signals to speakers.
• [MIX MONO] (Mixed monophonic)
- Transfer mixed left and right sound
signals to speakers.
OP MODE
DYNAMIC RANGE
DUAL MONO
To Next Page
Loading...
