39
English
EN
5 Repeat steps 3 and 4 to assign more
functions to buttons on the steering wheel.
• To clear the assignment, tap [Clear All].
Reset the system
If the system hangs up, reset it.
1 Flip up the protective cover.
2 Press RESET with the tip of a ball-point
pen or toothpick.
Replace the fuse
If there is no power, check the fuse and replace
it if it is damaged.
1 Detach the main unit from dashboard.
2 Check the electric connection.
3 Remove the damaged fuse from the rear
panel.
4 Insert a new fuse with the same
specications (15 A).
Tip
• If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In this case,
consult your Philips retailer.
Upgrade the rmware
Note
• Power supply must not be interrupted during the
upgrade.
• When the rmware upgrade succeeds, all settings are
restored to the factory default status.
Register your product
1 Go to www.philips.com/welcome.
2 Click the link of "Register my product"
(the exact wording of this link name may
vary in different languages).
3 Log in with your account on the prompt
Web page.
• If you have no account for Club Philips,
create one rst on this Web page.
4 Search your product with "CED2000/98"
as the keyword.
5 Click the link of search result to access the
Web page for registering your product.
6 Fill in necessary information about this
product to complete the registration.
FUSE 15A
To Next Page
Loading...
Need help?
General
