Philips CEM2000 User Manual

15
Store radio stations in
memory
You can store up to 6 stations in each band.
Store staions automatically
1 Press OPTIONS repeatedly until
[AUTO-SCAN] is displayed, then press
/OK/MUTEWRFRQÀUP
The six strongest stations of the »
selected band are saved in preset
channel automatically: FM1,FM2,FM3
1-6, AM1, AM2.
Store staions manually
1
Tune to a station that you want to store.
(see ‘Tune to a radio station’ on page 16)
2 Long Press -/RRESET or +/PRESET to
enter store mode.
LCD Preset number blink.»
3 Short press -/RRESET or+/PRESET to
select storing location.
4 Press /OK/MUTEWRFRQÀUP
The station is saved in the selected »
channel.
LCD Preset number light up always.»
Tune to a preset station
1
Press or to select band.
2 Press -/RRESET or +/PRESET to select
the preset station.
4 Listen to radio
Tune to a radio station
1
Press SOURCE repeatedly to select
Tuner.
2 Press or to select band: [FM1],
[FM2], [FM3], [AM1], or [AM2] .
3 Press or to tune to a radio station
manually.
The radio station is broadcast.»
To search for a radio station »
automatically, press
or for 3
seconds.
Select tuner area
You can select the suitable country area of the
radio.
1 Press SOURCE to select Radio mode,
Press MENU repeatedly to select area.
2 Rotate Encoder knob to select:
[ Europe] (Western Europe)
[ USA] (United States)
[ LATIN] (Latiin America)
[ ORIT] (Russia)
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
1 Press OPTIONS repeatedly until
[LOCAL] or [DX] is displayed.
2 Rotate /OK/MUTE to select a setting:
[ LOCAL SEEK ON] (local seek on):
Only stations with strong signal can
be broadcast.
[ LOCAL SEEK OFF] (local seek
off): Stations with strong and weak
signals can be broadcast.
English
EN

Philips CEM2000 Specifications

General

Brand	Philips
Model	CEM2000
Category	Car Receiver
Language	English