Philips CEM2000 - 7 Adjust System Settings; Resetting the Unit

20
Reset
You can reset the unit to its default setting.
1 Detach the front panel.
2 Press the reset button by using a ball-
point pen or a similar tool.
Preset adjustments such as preset »
channels and sound adjustments are
erased.
7 Adjust system
settings
Turn demo mode on/off
When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1 Press MENU.
2 Press or repeatedly to until [DEMO]
is displayed.
The screen shows current Demo »
mode setting.
3 Rotate encoder knob to select a setting:
 [DEMO ON] : Turn on the demo
mode.
 [DEMO OFF] : Turn off the demo
mode.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1 Press MENU.
2 Press or repeatedly to until [BEEP]
is displayed.
3 Rotate encoder knob to select a setting:
 [BEEP ON]: Turn on the beep
sound.
 [BEEP OFF]: Turn off the beep
sound.
EN