Philips D Series - Display Interconnection and IR Control; Connecting a PC via DisplayPort (DP) Input; Daisy-chaining Multiple Displays via RS232; Connecting an External IR Receiver

65BDL4550D_75BDL4550D_86BDL4550D
16
3.2.3. Using DP input
PC
DP Out
[DP IN]
DVI-I
RS232
OUT
RS232
IN
DP IN
3.3. Connecting Multiple Displays in a Daisy-chain Configuration
You can interconnect multiple displays to create a daisy-chain conguration for applications such as a menu board.
3.3.1. Display control connection
Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2.
DISPLAY 1 DISPLAY 2
PC
[RS-232C IN]
[RS-232C]
[RS-232C OUT] [RS-232C IN]
3.4. IR connection
FORMAT
SOURCE
INFOLIST
OPTIONSADJUST
VOL
NORMAL
ID
ID SET ENTER
DISPLAY 1
[IR IN]
External
IR Receiver
NOTE:
This display’s remote control sensor will stop working if the [IR IN] is connected.