Philips DCM2060/79 - Play from Ipod;Iphone;Ipad

11EN
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone
and iPad models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod nano (2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• iPad 2
• iPad
Load the iPod/iPhone/iPad
1 Push the dock compartment to open it.
2 Place the iPod/iPhone/iPad in the dock.
Install the rubber pad
If necessary, install the supplied rubber pad to
keep the iPad/iPad 2 stable before you place
the iPad/iPad 2.
Listen to the iPod/iPhone/iPad
Note
•
Make sure that the iPod/iPhone/iPad is loaded correctly.
1 Press SOURCE repeatedly or DOCK on
the remote control to select iPod/iPhone/
iPad source.
2 Play tracks on the iPod/iPhone/iPad.
• To pause/resume play, press
.
• To skip to a track, press
/ .
• To search during play, press and hold
/ , then release to resume
normal play.
• To go back to the previous iPod/
iPhone menu, press MENU.
• To scroll through the menu, press
/ .
• Toconrmaselection,pressOK.
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.
Charge the iPod/iPhone/iPad
Note
•
iPod with color display, iPod classic, and iPod with video
are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
DCM2060_79_UM_V1.0.indd 11 6/1/2012 10:53:55 AM