Philips DCM2060/79 - Play Options; Adjust Sound; Display Different Information

12 EN
Tip
•
For certain iPod models, it may take up to a minute
before the charging indication appears.
Play options
Pause/resume play
During play, press to pause or resume play.
Repeat/shufe play
1 During play, press REPEAT/SHUFFLE
repeatedly to select:
•
: play the current track repeatedly.
•
(forMP3/WMAonly):playall
tracks in this album repeatedly.
•
: play all tracks repeatedly.
•
: play all tracks randomly.
2 To resume normal play, press
REPEAT/SHUFFLE repeatedly until the
above icons disappear.
Skip to a track
For CD:
Press
/ to select another track.
For MP3 disc and USB:
1 Press / to select an album or a folder.
2 Press / toselectatrack/le.
Tip
•
To select a track directly, you can also press a key on
the numerical keypad.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, press to stop
playback, then press PROG to activate the
programming mode.
» [PROG] (program)isdisplayed.
2 For MP3/WMA tracks, press / to
select an album.
3 Press / to select a track, then press
PROGtoconrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG](program)is
displayed.
• To erase the program, when playback
is stopped, press
.
Adjust sound
During play, you can adjust volume and select
sound effects.
Function Action
To increase or decrease volume Press VOL +/-.
To mute or restore sound Press
.
To turn dynamic bass enhance-
ment on/off
Press DBB.
To select a sound effect:
[POP](pop)
[JAZZ](jazz)
[CLASSIC](classic)
[ROCK](rock)
[FLAT](at)
Press DSC
repeatedly.
Display different information
During play, press DISPLAY repeatedly to view
time and different play information.
DCM2060_79_UM_V1.0.indd 12 6/1/2012 10:53:57 AM