Philips DCM2060 - Play Options

13
English
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
• For certain iPod models, it may take up to a minute
before the charging indication appears.
Play options
Pause/resume play
During play, press to pause/resume play.
Repeat/shufe play
1 During play, press REPEAT/SHUFFLE
repeatedly to select:
• : play the current track repeatedly.
• (forMP3/WMAonly):playall
tracks in this album repeatedly.
• : play all tracks repeatedly.
• : play all tracks randomly.
2 To resume normal play, press REPEAT/
SHUFFLE repeatedly until the above icons
disappear.
Skip to a track
For CD:
Press / to select another track.
For MP3 disc and USB:
1 Press / to select an album or a folder.
2 Press / toselectatrack/le.
Tip
• To select a track directly, you can also press a key on
the numerical keypad.
Search within a track
1 During play, press and hold / .
1 Push DOCK for iPod/iPhone/iPad to open
the dock compartment.
2 Place the rubber pad into the dock
compartment as indicated.
3 Place an iPad or iPad 2 into the dock.
Listen to the iPod/iPhone/iPad
1 Make sure that the iPod/iPhone/iPad is
loaded correctly.
2 Press SOURCE repeatedly or DOCK on
the remote control to select iPod/iPhone/
iPad source.
3 Play tracks in the iPod/iPhone/iPad.
• To pause/resume play, press .
• To skip to a track, press / .
• To search during play, press and hold
/ , then release to resume
normal play.
• To go back to the previous iPod/
iPhone/iPad menu, press MENU.
• To scroll through the menu, press
/ .
• Toconrmaselection,pressOK.
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.
Charge the iPod/iPhone/iPad
Note
• iPod with color display, iPod classic, and iPod with video
are not compatible with dock charging.
EN
DCM2060_12_UM_Book1_V3.0.indb 13 11/15/2013 2:59:37 PM