Philips DCM2060 - Adjust Sound; Display Different Information

14
Display different information
During play, press DISPLAY repeatedly to view
time and different play information.
2 Release to resume normal play.
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, press to stop
playback, then press PROG to activate the
programming mode.
» [PROG] (program)isdisplayed.
2 For MP3/WMA tracks, press / to
select an album.
3 Press / to select a track, then press
PROGtoconrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG](program)is
displayed.
• To erase the program, when playback
is stopped, press .
Adjust sound
During play, you can adjust volume and select
sound effects.
Function Action
To increase/decrease volume Press VOL
+/-.
To mute/restore sound Press .
To turn dynamic bass
enhancement on/off
Press DBB.
To select a sound effect:
[POP](pop)
[JAZZ](jazz)
[CLASSIC](classic)
[ROCK](rock)
[FLAT](at)
Press DSC
repeatedly.
EN
DCM2060_12_UM_Book1_V3.0.indb 14 11/15/2013 2:59:37 PM