9EN
3 Get started
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
For optimal sound, use the supplied speakers only.
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
Connect FM antenna
Tip
For optimal reception, fully extend and adjust the
position of the antenna.
Connect the supplied FM antenna to the FM
ANTENNA jack on the main unit.
Connect power
Caution
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the apparatus.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Before connecting the AC adaptor, ensure you have
completed all other connections.
1 Switch the voltage selector on the back of
the unit to the local power line voltage.
2 Connect the power adaptor to:
the AC MAIN~ jack on the main unit.
the wall outlet.
R
AUX IN
L
ANTENNA
FM
SPEAKER OUT
AC MAIN ~
L+
L-
R+
R-
AC MAIN ~
To Next Page
Loading...
