EasyManua.ls Logo

Philips DCM3020 - Supported MP3 Disc Formats; Maintenance; 9 Troubleshooting

Philips DCM3020
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17EN
Supported MP3 disc formats
 ISO9660, Joliet
 Maximum title number: 999 (depending on

 Maximum album number: 99
 
44.1 kHz, 48 kHz
 
variable bit rates
Maintenance
Clean the cabinet
 Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
 When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
 Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
 After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good

CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
9 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before

unsolved, go to the Philips web site (www.

Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power cord of the unit
is connected properly.
Ensure that there is power at the AC
outlet.
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected
correctly.
Check if the stripped speaker wires are
clamped.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work

select the correct source with the remote
control instead of the main unit.
All manuals and user guides at all-guides.com

Related product manuals