15EN
7 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press SLEEP
repeatedly to select a set period of time (in
» When sleep timer is activated,
is
displayed.
To deactivate sleep timer
Press SLEEP repeatedly until [OFF]
displayed.
» When sleep timer is deactivated,
disappears.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER, USB, or iPhone/iPod/iPad is
activated to play at a preset time.
Note
Ensure that you have set the clock correctly.
1 Press and hold TIMER to active the timer
mode.
2 Press SOURCE to select a source, and
press TIMER
» The hour digits are displayed and begin
to blink.
3 Press / to set the hour and press
TIMER
» The minute digits are displayed and
begin to blink.
4 Repeat step 3 to set the minute.
» The timer is set and activated.
Activate and deactivate the alarm
timer
Press TIMER repeatedly to activate or
deactivate the timer.
» If the timer is activated, the display
shows
.
» If the timer is deactivated,
disappears on the display.
Note
If DISC/USB/iPhone/iPod/iPad source is selected
and the track cannot be played, tuner is activated
automatically.
Play from external audio device
You can play from an external audio device
such as MP3 player through this unit.
1 Connect the audio device.
For audio device with red/white audio
output sockets:
to the AUX-IN sockets and to the audio
output sockets on the audio device.
For audio device with headphone
sockets:
Connect the supplied MP3-Link cable to the
MP3-LINK socket and to the headphone
socket on the audio device.
2 Press SOURCE to select MP3-LINK/AUX-
IN source.
3 Play the device.
Adjust display brightness
Press DIM repeatedly to select different levels
of display brightness:
High brightness
Mid brightness
Low brightness
To Next Page
Loading...
