Philips DE3203 - Using the Continuous Drainage

17EN
English
2 Open the water tank cover and
empty the water into a sink.
3 Wipe the outside of the water
tank dry with a clean cloth.
4 Put the water tank back into the
dehumidier.
Note
• The dehumidier will resume
working after the water tank is
emptied.
Using the continuous
drainage
The dehumidier can also drain
excess water by attaching a hose.
This allows you to operate the
dehumidier without emptying the
water tank.
1 Turn o the dehumidier and
unplug from the wall socket.
2 Remove the water tank from the
dehumidier.
3 Connect the hose to the
drainage outlet.