Philips DE3203 - 7 Storage

20 EN
7 Storage
1 Turn o the dehumidier and
unplug from the wall outlet.
2 Clean the dehumidier, empty
the water tank and wash
the back cover (see chapter
‘Cleaning’).
3 Let all parts dry thoroughly
before storing.
4 Store the dehumidier in a cool,
dry location.
2 Pull the back cover, and remove
it from the dehumidier.
3 If the back cover is very dirty, use
a soft brush to brush away the
dust. Wash the back cover under
a running tap water.
4 Allow the back cover to air dry
thoroughly before placing back
in the dehumidier.
5 Put the back cover back into the
appliance.
6 Put the plug of the dehumidier
in the wall outlet.
7 Wash your hands thoroughly
after cleaning the back cover.