11
English
EN
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby
• Press again to switch the unit to standby
mode.
» The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
• Press and hold for more than three
seconds.
» [ECOPOWER] (Eco Power) is
displayedbriey.
Tip
• The unit switches to Eco Power mode after 15 minutes
in standby mode.
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold to switch the unit to Eco Power/
standby mode.
Demonstrate the unit’s
features
• In standby mode, press /MENU until
[WELCOME TO PHILIPS] (welcome to
Philips) scrolls from the right to the left on
the display, and then [DEMO ON] (demo
on)isdisplayedbriey.
» This system’s features are displayed
one by one.
• To turn off the demonstration, press
/MENU again.
Note
• You can also press on the main unit to turn on/ turn
off the demonstration.