Philips DVDR3390 - Timer Recording Setup; About Timer Recording; Manual Timer Recording Procedure

English
32
About timer recording
Use ‘Timer Recording’ to automatically
start and stop a recording at a later date/
time. The recorder will tune to the
right program channel and begin
recording at the speci ed time.
With this recorder, you can
pre-program up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The recording mode, see the section
“RECORD settings – Default
Recording Mode” in this chapter.
TIMER
OK
Timer recording (manually)
A
Turn on the TV power. Select the
correct Video In channel at the TV.
B
Press TIMER on the remote control.
 The timer schedule list appears.
1
2
3
4
5
6
Source RecMode Date Start End
Timer Schedule
C
Press OK on the remote control.
 The VCR Plus+
®
System menu
appears.
Enter the PlusCode programming
number for the show you wish to
record or select CANCEL for manual
timer recording. To go back to timer
schedule, press [RETURN].
CONFIRM CANCEL
D
Select
CANCEL
in the menu and press OK.
 The timer editor menu appears.
Timer Editor
Rec Mode
Mode
Date
Start
End
SP
Once
Source
Ch003
01 / 31 / 06
10 : 33 PM
11: 03 PM
OK
Cancel
OK
E
Use ST keys to select an entry in the
menu and press X to enter its options.
Recording (continued)
TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on
another player,  nalize the disc. See “Playing your recordings (DVD±R) on other DVD players”.