English
60
Other Information
Installing the latest software
The software installed in your recorder is
continuously being re ned for greater
stability and compatibility of the set.
Periodically, Philips will issue upgrades for
the software which you copy onto a CD
and install the software of your recorder.
Caution! Power supply must not be
interrupted during upgrade!
A
Get the version information of this
recorder by pressing the number keypad
‘0009’ and press OK on the remote
control.
Write down the information for your
current software version.
B
Visit the Philips website ‘www.philips.
com/support’ to check the availability of
the latest software upgrade. Download
the software to a CD-R.
Note: When checking for the latest
software upgrade, please also check for
any accompanying instructions on
installing the software.
To Next Page
Loading...
