Philips DVDR3577H/05 - Page 100

Reference : SGP_AVS_SW_ATLAS-05-05 Classification : COMPANY RESTRICTED
Version : 0.17 Project : ATLAS_DSW
Status : Proposed Chapter : User Manual
Date : 2006-09-12
Section : Diagnostic Software (Leco+)
© Philips Electronics N.V. 2006 Philips Semiconductors Page 80 of 124
1
Nucleus Name
DS_ASP_FanSpeedSet
Nucleus Number 1607
Description This nucleus sets the speed of the fan that controls the temperature within the
set.
Technical - Decode user input.
- Set pio-pins FAN_C1 and FAN_C2.
Execution Time Less than 1 second.
User Input Speed to be set: off, low, medium, high
Error Number Description
160700 Setting the new fan speed succeeded
160701 The IIC bus failed
160702 The user provided wrong input
Example
DS:> 1607 low
160700:
Test OK @
2
Nucleus Name
DS_ASP_LightDisplay
Nucleus Number 1608
Description This nucleus lights the entire display.
Technical - Set all segments on in the display buffer.
- Set the grids correct in the display buffer.
- Send the display buffer to the ASP.
Execution Time Less than 1 second.
User Input None
Error Number Description
160800 Lighting the entire display succeeded
160801 IIC-bus communication failed
Example
DS:> 1608
160800:
Test OK @
3
Nucleus Name
DS_ASP_BlinkDisplay
Nucleus Number 1609
Description This nucleus lights the entire display, and lets it blink. Only for ASP
Technical - Set all segments on in the blink buffer.
- Set the grids correct in the blink buffer.
- Send the blink buffer to the ASP.
Execution Time Less than 1 second.
User Input None or ‘on’ to start the blinking of the display.
‘off’ To stop the blinking of the display.
Error Number Description
160900 The test succeeded
160901 IIC-bus communication failed
160902 The user provided wrong input
Example ASP
DS:> 1609
160900:
Test OK @
DS:> 1609 off
160900:
Test OK @
4
5