Philips DVDR3577H/05 - 1.1. PCB Locations and General Specs; 1.3. RF Tuner and Analog Interfaces

1. Technical Specifications and Connection Facilities
1.1. PCB Locations
Digital Board
Front Boar
d
Standb
y
Boar
d
HDD Basic En
g
ine
Analo
g
Boar
d
HDMI
Board
PSU Boar
d
1.2. General
Mains voltage: 220V-240V
Mains frequency: 50 Hz
Power consumption: 35 W
Standby Power consumption: <3.5 W
1.3. RF Tuner (Analogue)
Test equipment: Fluke 54200 TV Signal generator
Test streams: PAL BG Philips Standard test pattern
1.3.1.1. System
B/G, I, L/L’, D/K
1.3.2. RF – Loop Through:
Frequency range: 43 MHz – 860 M Hz
Gain (ANT IN – ANT OUT) standby mode: -2.5 dB to -4dB
Gain (ANT IN – ANT OUT) active mode: 2 dB± 4dB
1.3.3. Receiver
Output of Euro connector/Cinch to be used for measurements (direct output from front end)
Video Performance:
Frequency response (0 - 4.4 MHz): 0 ± 4dB
Group delay (0 - 4.4 MHz): 0 ± 150 nsec