EasyManua.ls Logo

Philips DVP3354 - Preferences

Philips DVP3354
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Preferences
Note
Stop disc play before you can access to [Preferences].
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Preferences], then press .
3 Select an option, then press OK.
4 Select a setting, then press OK.
To return to the previous menu, press
.
To exit the menu, press SETUP.
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
Note
If the language you have set is not available on the disc,
the disc uses its own default language.
For some DVDs, the subtitle/audio language can only
change from the disc menu.
To select the languages that are not listed in the menu,
select [Others]. Then check the Language Code list at
the back of this user manual and enter the respective
language code.
[Parental control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
[NTSC] - For NTSC-system TV.
[TV Display]
Select a display format:
[4:3 Pan Scan] - For 4:3 screen TV: full-height
display with the trimmed sides.
[4:3 Letter Box] - For 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
[16:9] - For wide-screen TV: display ratio 16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
[On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Note
For more detailed description, see “Get started” >
Turn on progressive scan”.
[Picture Setting]
Select a predefi ned set of picture color settings or
customize the personal setting.
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[Component Video]
Select the video output that matches the video
connection between this product and the TV.
[Interlaced] - Component video ( Y Pb Pr)
connection.
[RGB] - Scart ( TV OUT) connection.
EN

Related product manuals