Page 102 E
VERFLO
TM
SERVICE & TECHNICAL INFORMATION 1039055, VER. 06
Pressure measurement of the product tank in PSI Used to measure the balance and
peak pressure. To be used to check the sieve canister balance. 15-27 PSI range
Estimation of flow rate in liters per minute from EverFlo product tank, derived from the
pressure slope.
Time, Model
Factory supplied identifier and date/time from the flash memory. Internal timer which
resets to zero when the device is reset or powered off. Model number and Serial
Number are enabled for edits to the PCA based on the device label.
To Next Page
