Philips FX30 - USB Recording Features; Recording to USB from Disc; Recording CDDA Content

18 EN
9 USB record
AudioCDtracksandMP3lesarerecordedin
.mp3 format.
ThersttimeyourecordtoUSB,afolderis
automatically created in the USB device. Each
timeyourecordtoUSB,therecordedlesare
stored in a sub-folder. Files and sub-folders are
named numerically in the order by which they
are created.
Record to USB
1 Plug the USB device into the socket on
the unit.
2 Select the disc source and load a disc. You
can select a track from which a recording
starts.
3 Press USB REC to start recording.
• You can press USB REC repeatedly to
select:
A [RECONE](recordone):therst/
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
Note
• If the USB device does not have enough memory to
storetheaudioles,amessageaboutafullmemoryis
displayed.
Record CDDA contents to
USB at any playback time
Note
• Make sure that the USB storage device is connected to
the main unit.
To record the CDDA content into a USB
storage device at any playback time:
1 Press USB REC during CDDA playback.
» The recording starts.
2 Press to stop recording.
Tip
• If the USB storage device does not have enough
memorytostoretheaudioles,amessageaboutafull
memory is displayed.
• Anytime recording is not available for MP3-CD discs.
• Anytime recording is not available for High speed
recording.