38
Digital Zoom – Enables digital zoom (not available in Mono version).The factory
default* setting is ON.
Choices:
*On . . . . . . . .When the camera reaches maximum optical zoom, after a pause
the image will be electronically zoomed (up to 6.25 times).
Off . . . . . . . .When the camera reaches maximum optical zoom it will not
electronically zoom.
PTZ SETUP
(See Figure AM3 for an illustration of the PTZ Setup menu hierarchy).
Autopan Speed – Adjusts how fast the camera moves during Auto Pan/ Auto Scan.
The factory default* setting is 30°/second.
Choices: . . . .Sliding Scale from 1°/second to 60°/second.
Tour Period – Changes the dwell time between Presets during a Preset Tour.The
factory default* setting is 5 seconds.
Choices: . . . .Sliding Scale from 3 seconds to 10 minutes.
PTZ Fixed Speed – Sets the Pan/Tilt speed when controlled by a fixed speed con-
troller.The factory default* setting is 4.
Choices: . . . .Sliding Scale from 1 (slow) to 15 (fast).
Inactivity – Selects the mode that the dome will revert to after the period of time
specified in the Inactivity Period (next menu option) without operator activity.
Choices:
Off . . . . . . . . .remains on current scene indefinitely.
Scene 1 . . . . .returns to preset 1.
Prev Aux . . . .returns to previous activity (previous activities include Aux
commands 1, 2, 8, 50, 52).
Inactivity Period – The time period of inactivity before the above action will occur.
Choices: . . . .Sliding Scale from 3 seconds to 10 minutes.
AutoPivot – AutoPivot automatically rotates the camera 180° when following a sub-
ject travelling directly beneath the camera.The factory default* setting is ON.
Choices:
*On . . . . . . . .Camera will automatically pivot.
Off . . . . . . . .Camera stops tilting when it is looking straight down.
DISPLAY SETUP
(See Figure AM4 for an illustration of the Display Setup menu hierarchy).
Display Adjust – Adjusts location and brightness of on-screen display. See on-screen
display for instructions.
On-screen Display – Controls on-screen display for preset and sector titling.The
factory default* setting is ON.
Choices:
*On . . . . . . . .titles are displayed.
Off . . . . . . . .titles are hidden.
Zone Masking – Selects zones for privacy masking (video blanking).The Zones
available are 1 to 16.
Language – Selects the language to be displayed.
Choices: English, Spanish, French, German
To Next Page
Loading...
