Philips HD2145/62 - Steam Valve and Floater Care

22
EN
Floater
•
Hold the rubber ring around the oater,
and pull outwards to remove it from the top
lid. Clean it regularly with water and make
sure there’s no food residue sticking to it,
otherwise you may encounter diculty to
open the lid.
•
To assemble the oater, put the thin end of
the oater into the hole on the lid (g.a),
and assemble the rubber ring around the
oater (g.b).
1
2
•
You can also add water to the pot and
start the steam function to help with the
cleaning.
•
Hold the anti-block cap and pull it
outwards to remove it from the detachable
inner lid for cleaning.
•
To assemble the detachable inner lid, fully
attach it to the top lid, and then screw the
nut around the temperature controller
clockwise.
Note
•
Always follow the right direction when
asseambling the nut.
Steam valve
•
Press the recess of the steam valve and
remove it from the top lid for cleaning.