1 Press the espresso button and cappuccino button simultaneously for
approximately 5 seconds.
-
The orange descaling light flashes slowly during the entire descaling
cycle.
2 Turn the control dial to the hot water icon and brew hot water. Let hot
water flow out of the hot water/steam wand for 10 seconds.
3 Turn the control dial back to the single bean icon.Wait approximately 1
minute to let the descaling solution act.
4 Press the espresso button to brew a cup of espresso.Wait approximately
1 minute to let the descaling solution act.
Note: During the descaling process, the coffee grinding function does not
work.If you press the espresso button, only water will flow out of the
machine.
5 Repeat steps 2 to 4 until the ‘water tank empty’ light lights up
continuously.
Rinsing cycle
1 Remove the water tank from the machine and rinse it.
2 Fill the water tank with fresh tap water up to the MAX indication and slide
the water tank back into the machine.
3 Empty the big cup and place it back onto the drip tray under the hot
water/steam wand.
4 Press the espresso button and brew a cup of espresso. Repeat this twice.
23
English
To Next Page
Loading...
