First installation
Installing the machine
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
3 Insert the small plug into the socket located on the back of the machine.
4 Insert the plug into the wall socket.
5 Remove the protective sticker from the drip tray and slide the drip tray
into the guiding grooves in the front of the machine.
Note: Make sure the drip tray is fully inserted.
6 Insert the automatic milk frother.
Filling the water tank
1 Turn the automatic milk frother to the left.
8
English
To Next Page
Loading...
