Philips HD8652 - Coffee Bean Container Filling; Machine Heating Process

2 Remove the water tank from the machine.
3 Rinse the water tank under the tap.
4 Fill the water tank with cold tap water up to the MAX indication.
5 Slide the water tank back into the machine.
Filling the coffee bean container
1 Fill the coffee bean container with espresso beans.
Note: Only use espresso beans. Never use ground coffee, unroasted
coffee beans or caramelised coffee beans, as this may cause damage to
the machine.
2 Put the lid on the coffee bean container.
Heating up the machine
During the initial heat-up process, fresh water flows through the internal
circuit to heat up the machine. This takes a few seconds.
1 Place a big cup under the hot water/steam wand and the coffee spout.
Make sure the control dial points to one of the coffee bean icons.
2 Press the on/off button.
9
English