Philips HD8825 - Using the Machine for the First Time; Circuit Priming

12 ENGLISH
12
Switch the power button to “I”. The " " button  ashes.
13
To turn on the machine, simply press the " " button.
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the  rst time, the following activities need to
happen:
1) you need to prime the circuit;
2) the machine will perform an automatic rinse/self-cleaning cycle;
3) you need to perform a manual rinse cycle.
Circuit Priming
During this process, fresh water  ows through the internal circuit of the
machine and the machine warms up. This takes a few minutes.
1
Place a container under the steam wand.
2
The “ ” light and the “ ” light  ash simultaneously; then the “ ” but-
ton lights up.
To prime the circuit, press the “
” button.