31
ENGLISH
31
Daily Cleaning of the Automatic Milk Frother
For hygienic reasons and to ensure a perfect milk froth consistency, it is
important that you clean the Automatic Milk Frother after each use.
Warning:
Danger of scalding! Dispensing may be preceded by small jets of hot
water.
After each milk frothing, you always need to:
1
Insert the suction tube into a container lled with fresh water.
2
Place an empty container under the Automatic Milk Frother.
3
Press the " " button to select steam. The button ashes.
4
The “ ” button ashes during the preheating time required by the
machine.
5
During the dispensing phase the “ ” button ashes. Dispense water
from the Automatic Milk Frother until clear water ows out.
Press the “
” button to stop dispensing.
6
Clean the suction tube with a damp cloth.
To Next Page
Loading...
