50
ENGLISH
INTERRUPTION OF THE DESCALING CYCLE
Once you have started the descaling cycle, you must complete it till the
very end without turning o the machine.
In case you get stuck during the descaling procedure, you can exit by
pressing the ON/OFF button. If this happens, follow the steps below.
2
Make sure that the power button is on "I".
3
Press the “ ” button to turn on the machine.
4
Wait until the " ", " ", " " and " " buttons are shining steadily.
1
Empty and carefully rinse the water tank, then ll it with fresh water up
to the MAX level.
To Next Page
Loading...
