47
ENGLISH
47
14
At the end of the rinse cycle, the " " button turns o .
13
The “ ” light shines steadily. When the " " button ashes, press it to
start the rinse cycle.
Note:
The rinse cycle may be paused by pressing the
“ ”
button.
This allows you to empty the container or to leave the machine unattended
for a short time.
To resume the cycle, press the “ ” button again. During the pause the “ ”
button ashes. During the descaling cycle the “
” button is constantly on.
12
Empty the container and place it back.
15
The machine warms up and performs the automatic rinse cycle.
The "
" and
" "
buttons ash simultaneously.
The descaling cycle is now complete.
Caution:
If the “
” red light turns on and the “ ” light does not turn o , the
water tank has not been lled to the MAX level for the rinse cycle. Fill
the water tank with fresh water and repeat the process from step 13.
To Next Page
Loading...
