What to do if the brew group cannot be inserted in Philips Coffee Maker?
If the brew group of your Philips Coffee Maker cannot be inserted, ensure it is in the off position. If that doesn't work, insert the drip tray and coffee grounds drawer, close the service door, and turn on the machine without the brew group inside. This will move the gearmotor to the correct position. Then, turn off the machine and reinsert the brew group.
Why is my Philips HD8828 not frothing milk?
If the milk is not being frothed or dispensed by your Philips Coffee Maker, ensure that the milk carafe is clean and correctly inserted. Also, verify that the carafe dispensing spout has been properly removed and that all components of the milk carafe are correctly assembled. The type of milk used may also be a factor; use the type of milk suggested.
How to make frothed milk hotter in my Philips Coffee Maker?
If the frothed milk from your Philips Coffee Maker is too cold, preheat the cups with hot water before frothing the milk.
What to do if the descaling cycle cannot be completed on Philips HD8828 Coffee Maker?
If the descaling cycle of your Philips Coffee Maker cannot be completed, and the water dispensed for the rinse cycle is insufficient, press the on/off button and follow the instructions.
How to make coffee hotter in my Philips HD8828 Coffee Maker?
If the coffee from your Philips Coffee Maker is not hot enough, preheat the cups with hot water. Additionally, ensure that the temperature setting is correctly adjusted.
How to fix coffee leaking from the dispensing spout of my Philips HD8828 Coffee Maker?
If your Philips Coffee Maker is dispensing coffee that leaks out of the spout, it is likely that the dispensing spout is clogged. Clean the dispensing spout and its holes to resolve this issue.
Why is my Philips Coffee Maker brewing coffee slowly?
If coffee is not brewing, brews slowly, or only a few drops come out of your Philips Coffee Maker, it could be due to several reasons. The coffee grind might be too fine, the circuit may not be primed, the brew group or dispensing spout could be dirty, or the machine circuit might be clogged with limescale. To resolve this, you can change the coffee blend or adjust the grind, prime the circuit, clean the brew group, clean the dispensing spout and its holes, or descale the machine.
What to do if the red icon is always on my Philips HD8828 Coffee Maker?
If the red icon is always displayed on your Philips Coffee Maker, it might be because the coffee grounds drawer was emptied while the machine was off or you didn't wait long enough before reinserting it. Always empty the coffee grounds drawer when the machine is on and wait for the icon to appear before putting the drawer back in.
General| Color | Black |
|---|---|
| Pump Pressure | 15 bar |
| Integrated Milk System | No |
| Adjustable Coffee Strength | Yes |
| Programmable Auto On/Off | Yes |
| Rinse and Clean Alert | Yes |
| Descaling Alert | Yes |
| Weight | 7.2 kg |
| Brewing Units | 1 |
| Type | Espresso machine |
Lists essential safety measures to follow when using the appliance to prevent injury or damage.
Provides guidelines for the safe use and handling of the power supply cord.
Guides the user through priming the machine's internal circuit before first use.
Details the automatic rinse and self-cleaning cycle, and the manual rinse procedure.
Step-by-step guide for brewing espresso or long espresso using whole coffee beans.
Instructions for brewing espresso or long espresso using pre-ground coffee.
Routine daily cleaning procedures for the coffee machine's exterior and internal components.
Instructions for daily cleaning of the milk carafe to ensure hygiene and frothing quality.
Procedure for weekly cleaning and maintenance of the machine's brew group.
Steps to prepare the machine and environment before starting the descaling process.
Execution of the descaling cycle, including dispensing the solution.
Instructions for rinsing the machine after the descaling cycle is completed.
To Next Page
