6
9
1
5
7
3
INSTALLATION
FIRST USE - USE AFTER A PERIOD OF INACTIVITY
To improve the product quality, carry out this procedure at rst use of the machine and after long periods of inactivity.
A few simple operations are needed to ensure the quality of your favourite beverages over time.
Place a container of large size under the
co ee dispensing spout.
Press the button once or more until the
icon is displayed.
Select the product by pressing the
button shown.
Press the "OK" button to start dispensing
water through the dispensing spout. DO
NOT insert co ee at this stage.
Fill the water tank with fresh drinking
water as previously described. Your
machine is now ready to brew excellent
beverages!
At the end of the dispensing phase, take
the container and place it under the hot
water wand.
At the end, take the container and
empty it.
Repeat the process from step 5 to step 7
until the water tank is empty.
Press the button and wait for the
machine to dispense the programmed
quantity of water. Water dispensing can
be interrupted by pressing "STOP".
To Next Page
Loading...
