41
1
4
7
3
6
9
2
5
8
MILK CARAFE CLEANING
The carafe must be removed and properly washed at least once a week.
This procedure guarantees the perfect sanitation of all components.
Note: Pay attention to how the components are assembled. This little shrewdness will facilitate the subsequent
reassembling. The inner side of the service door shows a quick guide on how to reassemble the carafe.
The carafe must be removed from the
machine and emptied for its cleaning.
Rotate the handle counter-clockwise to
the unlock position.
Remove the suction hose.
Press on the sides and lift the lid.
Remove the handle with the suction
hose.
Remove the internal tting.
Disengage the handle by rotating it
clockwise.
Remove the connector which is in
contact with the machine.
Remove the external tting by pulling it.
All components can be thoroughly washed with hot water.
After washing the components, reassemble them by following the instructions on next page.
To Next Page
Loading...
