5
5
1 2
1234
A
B
C
Select the desired language by pressing
the arrow buttons (
) or ( ).
Press the save button. The machine activates the warming up
phase. Wait until it is completed.
When warm-up phase is complete, the
machine performs a rinsing cycle of the
internal circuits. It is possible to interrupt
the cycle by pressing the "STOP" button.
The machine is now ready for use.A small quantity of water is dispensed.
Wait for this cycle to be completed
automatically.
SETTING THE LANGUAGE
This setting allows you to choose the operating language of the machine. It also allows you to adjust the parameters of the beverages to
the typical parameters of the country where the machine is used. This is why some languages are di erentiated also by country.
If no language is selected, you will be requested to select it the next time the machine is started.
MEASURING THE WATER HARDNESS
The test strip can only be used for one measurement.
Immerse the water hardness test strip
provided with the machine in water for
1 second.
Check the water hardness value and set:
- The machine water hardness level (page 30).
- The Intenza Aroma System (page 7).
Intenza Aroma System
Machine water hardness setting
To Next Page
Loading...
