Philips HD8833/18 - Page 33

29
CALENDAR
POWERON TIMER
TIMER 1
TIMER 2
This menu allows you to programme the machine power-on times, according
to your needs. The machine performs this function only if the power button
is switched to on.
It is possible to set 3 di erent power-on times, which can be managed
independently. For reasons of brevity, only the "TIMER 1" setting is described
below. The same setting procedure applies for the other timers.
Note: The switch-o is managed through the "STAND-BY"
programming.
To set the hour for power-on.
This menu allows you to adjust and set the  rst power-on time.
This menu allows you to adjust and set the second power-on
time.
This menu allows you to adjust and set the third power-on time.
To set the minutes of the power-on time.
TIMER 3
HOUR
MON
TUE
WED
THU
FRI
SAT
SUN
MINUTES
DAY OF THE WEEK
Use the ( ) or ( ) buttons to select a day and press
the (OK) button to con rm.
Use the ( ) or ( ) buttons to change the settings
for each day and press the (OK) button to con rm.
OFF = Time deactivated
ON = Time activated
Note: Each day must be set separately.
To set in which days of the week should the timer be
active.