26
English
Signal Description of signal Meaning of signal
The indicator light on the station
goes out.
The station is plugged in, and the robot
is connected.
The lights in the two buttons on the
robot flash orange.
The robot is in Wi-Fi set-up mode.s
The robot's lights go out. The robot has gone into sleep mode.
The robot will go into sleep mode if it
has not returned to the station. Press
the on/off button for 3 seconds or
longer to awake the robot.Then send it
to the station via the app or by pressing
the home button.
Reset/restore the robot
You can reset/restore the robot by pressing and holding both the home and
on/off buttons on top of the robot for 15 seconds.
Note: After resetting/restoring the robot, the robot needs to reconnect the
app, and the relevant settings in the app are removed.
Replacement
Ordering accessories
To buy accessories or spare parts, visit www.philips.com/myrobot3000 or go
to your Philips dealer. You can also contact the Philips Consumer Care Center in
your country (see the international warranty leaflet for contact details).
Replacement parts:
24 / 789 23 / 787 24 / 789
To Next Page
Loading...
