EasyManua.ls Logo

Philips HTL3320 - Using Your SoundBar; Selecting Sound Modes; Equalizer (EQ) Effects

Philips HTL3320
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
English
4 Use your
Soundbar
This section helps you use the Soundbar to play
audio from connected devices.
Before you start
• Makethenecessaryconnectionsdescribed
in the quick start guide and the user manual.
• SwitchtheSoundbartothecorrectsource
for other devices.
Turn ON and OFF
• Whenyourstconnecttheunittothemain
socket, the unit will be in STANDBY mode.
The Standby indicator will light up.
• Pressthe button on the remote control
to switch the main unit ON or OFF
• Disconnectthemainplugfromthemain
socket if you want to switch the unit o
completely
• IfaTVoranexternaldevice(OnlyforAUX
socket) is connected, the unit will switch on
automatically when the TV or the external
device is switched on.
Auto Standby
The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched o.
• Toswitchtheunitocompletelyremove
the mains plug from the mains socket.
• Pleaseturntheunitocompletelytosave
energy when not in use.
Select Modes
1
Press the button repeatedly on the
unit or press the
AUX
,
OPTICAL
,
HDMI
ARC
,
BT PAIR
,
USB
buttons on the remote
control to select the desired mode.
The indicator light on the front of the
main unit will show which mode is
currently in use.
•
Aux / USB
: When lit, shows that the
Soundbar in the Aux mode. When flash,
shows that the Soundbar in the USB
mode.
•
BT
: When lit, shows that the Soundbar
in the Bluetooth mode.
•
Optical
: When lit, shows that the
Soundbar in the optical mode.
•
HDMI (ARC)
: When lit, shows that the
Soundbar in the HDMI ARC mode.
Select Equalizer (EQ) Effect
Selectpredenedsoundmodestosuityour
video or music.
1
Press the
EQ
button on the remote control
to select your desired preset equalizer
eect.
All LEDs on top of the bar lights up for
0.5 sec to indicate entering EQ selection
menu.
LED(s) lit up according to current EQ
mode as follows:
•
(Movie)
recommended for viewing Movies
•
(Music)
recommended for listening to Music
•
(News)
recommended for listening to News
Press the
EQ
button to switch among
the modes.

Related product manuals