Philips HTL3320 - Volume Adjustment; Bluetooth Operation

12
Adjust the Volume
1
Press
Vol+/Vol- (Volume)
to increase or
decrease a volume level.
• Tomutesound,press
(Mute)
.
• Torestorethesound,press
(Mute)
again or press
Vol+/Vol- (Volume)
.
Note
: While adjusting the volume, the status LED
indicator will flash quickly. When the volume has
hit maximum/minimum value level, the status
LED indicator will flashes once.
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
youcanlistentotheaudiolesstoredonthe
device through your Soundbar speakers.
What you need
• ABluetoothdevicewhichsupports
BluetoothproleA2DPAVRCPandwith
Bluetooth version as 4.2 + EDR.
• Themaximumoperationalrangebetween
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press the button repeatedly on the unit
or press
BT
button on the remote control
to switch the Soundbar to Bluetooth mode.
The Soundbar's indicator blinks blue.
2
On the Bluetooth device, switch on
Bluetooth, search for and select
PHILIPS
HTL3310
to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
During connection, the Soundbar's
indicator blinks blue.
3
Wait until you hear "
Paired
" voice prompt
from the Soundbar.
If the successfully connected, the Blue
indicator will light up solidly
4
 Selectandplayaudiolesormusiconyour
Bluetooth device.
• Duringplay,ifacalliscoming,musicplay
is paused. Play resumes when the call
ends.
• IfyourBluetoothdevicesupports
AVRCPprole,ontheremotecontrol
you can press / to skip to a
track, or press to pause/resume play.
5
To exit Bluetooth, select other source.
• WhenyourswitchbacktoBluetooth
mode, Bluetooth connection remains
active.
Note
• Themusicstreamingmaybeinterruptedby
obstacles between the device and Soundbar, such
as wall, metallic casing that covers the device, or
other devices nearby that operate in the same
frequency.
• IfyouwanttoconnectyourSoundbarwith
another Bluetooth device, press and hold
BT
/
PAIR
on the remote control to disconnect the currently
connected Bluetooth device.
AUX / OPTICAL / HDMI
ARC Operation
Ensure that the unit is connected to the TV or
audio device.
1
Press the button repeatedly on the unit
or press the
AUX
,
OPTICAL
,
HDMI ARC
buttons on the remote to select the desired
mode.
2
Operate your audio device directly for
playback features.
3
Press the
VOL +/-
buttons to adjust the
volume to your desired level.