Philips HU4816 - Replacing the Humidification Filter; Filter Replacement Schedule; Filter Replacement Procedure

10 EN
6 Replacing the
humidification
filter
Replace the humidication lter every
6 months for optimal performance. If
the lter is in good condition, you could
use it for a longer period of time. Make
sure to replace the humidication lter
at least once a year.
Note
• Use only Philips original humidication
lter FY2402.
• Always unplug the humidier before you
replace the humidication lter.
Tip
• Register your product at
www.philips.com for further information
on how to replace your lter.
1 Take out the humidication lter
and the lter support from the
water tank (g. n).
2 Remove the humidication lter
from the lter support. Discard the
used lter (g. r).
3 Remove the packaging material
from the new humidication lter
(g. c).
4 Assemble the new humidication
lter around the lter support
(g. d).
5 Put the lter and the lter support
back into the water tank (g. e).
6 Put the upper unit back onto the
water tank (g. g).
Tip
• You can easily nd more information
about how to replace the lter in our
web page or by calling our Consumer
Care Center.