EasyManua.ls Logo

Philips IntelliVue - Transmitter Torque Requirements

Philips IntelliVue
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting Overview
4
Transmitter Torque Requirements
If the transmitter is disassembled, certain screws must be
re-installed at specific torque specifications.
Figure 2
shows the torque requirements in the transmitter.
Figure 2 Torque Requirements
Frequent Dropouts and NO SIGNAL, WEAK
SIGNAL, and TEL CANNOT ANALYZE INOPs on a
Single Channel
25
Frequent Dropouts and NO SIGNAL, WEAK
SIGNAL, and TEL CANNOT ANALYZE INOPs with
Multiple Channels
29
Frequent Dropouts along with TEL CANNOT
ANALYZE and INTERFERENCE INOPs
30
Message Page
Conversion Chart
2 inch-pounds = 0.23 joules
3 inch-pounds = 0.34 joules
6 inch-pounds = 0.68 joules
3 inch-
pounds
6 inch-
pounds
2 inch-
pounds
3 inch-
pounds
quickref.fm Page 4 Wednesday, June 5, 2002 3:08 PM

Related product manuals