RUN MODE
23
CHAPTER 4
RUN MODE
Overview
Run Mode is the default iPlayer 3 playback mode and
automatically launches when you power on the iPlayer 3
controller. The iPlayer 3 must be in Run Mode for you to
manually play show presets or shows associated with automatic
playback alarms.
Note: Run Mode is suspended when you enter USB Mode or
Configuration Mode.
Playing Shows
Preset Shows
There are five Preset buttons located on the faceplate of the
iPlayer 3. Each button is associated with a trigger. Press a Preset
button to set off a trigger and play its corresponding show
file(s).
When you power on the iPlayer 3 or exit from USB Mode, the
iPlayer 3 automatically enters Run Mode and begins playing the
show assigned to show Preset 1 (the show assigned to trigger
1). To switch to another show, press another Preset button (2
through 5) or use an external switch such as the Controller
Keypad available from Color Kinetics.
In addition to the Preset buttons, if you have an optional
Controller Keypad connected to your iPlayer 3, you can assign
triggers to the keys on the keypad.
To Next Page
Loading...
