Philips iPlayer 3 - Setting an Alarm

CONFIGURATION MODE
32
3. Press the up arrow to trigger number 4.
4. Press the right arrow to access the
S HOW T YPE ? menu item and
then use the up and down arrows until
D OWNLOADED S HOW is
displayed.
5. Press the right arrow to the
E FFECT T YPE ? menu item and then
press the up or down arrow to make a selection.
6. At the
T EST E FFECT menu item, press the right arrow to use the
show tester, which runs a live preview of your show.
7. Select an
E ND B EHAVIOR type:
–
L OOP
– L IGHTS O FF
–
J UMP TO T RIGGER
8. Select a transition type:
–
S NAP (no transition)
–
F ADE O UT (to black) & I N
– C ROSS F AD e (effect morphing)
9. Press the right arrow to save your changes.
Setting an Alarm
Alarms enable you to automate show playback. When you set
an alarm, you specify:
• The alarm number.
• Whether the alarm activates every day, on weekdays, on
weekends, on a specific day of the week, or on a specific
date.
• On what date the alarm turns off.
• Trigger / Show number with which to associate the alarm
• Whether the alarm turns on and off either:
– At a particular time on a clock. For clock time, the iPlayer 3
uses a 24-hour notation with hours ranging from 00 to 23.
– In relation to sunrise and sunset (astronomical time).